Product Overview
The new KOMOS V2 Kegerator builds upon the stellar feature set of the best-selling original model, sporting upgraded components for faster cooling and more efficient operation, and a redesigned interior that can hold up to FOUR 5-gallon kegs at one time. There’s no doubt that a four tap kegerator has never been so affordable! We love the KOMOS kegerator’s ease-of-assembly thanks to Duotight fittings and EVABarrier draft line, as well as the many other features that set it apart for a unit in this price range, including stainless steel Intertap forward-sealing faucets, stainless steel tower, digital controller, stainless steel door, stainless steel floor, rolling casters, tower cooling fan, and robust KOMOS regulator.
What's New in V2?
- Larger Capacity - Fits up to four 5-gallon homebrew kegs
- Dual Gas Line Inlets - Feed two gas lines at different pressures, or one CO2 and one Nitro.
- 10% More Energy Efficient
- 15% Faster Cooling Times
- 40% Thicker Insulated Walls
- 25% Larger Condenser
- 30% Larger Evaporator
The most eye-catching difference between the V2 and the original model is definitely the capacity. This is the first kegerator we have offered that comes with a quadruple tap tower option, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The V2 positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or ball lock corny kegs
Dual gas line inlets are absolutely clutch if you want to serve beverages at two 
different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap as a quick connect option for your gas lines.
different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap as a quick connect option for your gas lines.Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. The V2 also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines.
pecifications:
- 23.75" wide
- 25" deep
- 31.5" with CO2 mount
- 32.5" Tall (fridge only)
- 35" with Caster wheels
- 48.75" with tower
- 51" with Casters and Tower
- 110 v - 60 hz
- 0.8 Amp draw
Internal Dimensions:
- 19.5" wide
- 17" deep
- 16" down the center where compressor sits
- 28.5" tall
What Fits:
- 5 Gal. Torpedo Keg - 3
- 5 Gal. Slimline Torpedo Keg - 4
- 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3
- 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4
- 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3
- 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1
- 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1
- 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1
